Table of Contents
Advertisement
5.1 Adjusting INCOM
■ Adjusting Intercom PGM Volume
The volume of intercom receiver is adjusted using knobs on the back side and the right side of the camera.
If using the knob on the back side of the camera, follow Procedure 2, or if using the knob on the right side of the camera, follow
- Adjust the INTERCOM PGM volume on the back side of the camera.
1
Set the INTERCOM selector switch to "REAR".
2
Turn the INTERCOM-1 PGM-1/2 control knob and INTERCOM-2 PGM-1/2 control knob on the rear of the camera
to adjust the volume.
3
Turn the INTERCOM-1 PGM control knob and the INTERCOM-2 PGM control knob on the back side of the
camera to adjust the volume.
- Adjust the INTERCOM PGM volume on the side of the camera.
4
Set the INTERCOM selector switch to "INTERCOM1 FRONT" or "INTERCOM2 FRONT".
5
Set the PGM lines of the intercom system using the INTERCOM-1 PGM-1/PGM-2 switch and INTERCOM-2
PGM-1/PGM-2 switch on the back side of the camera.
Note:
6
Push the INTERCOM selector switch on the back side of the camera to the "INTERCOM-1" or "INTERCOM-2"
side.
7
Turn the INTERCOM PGM control knob on the right side of the camera to adjust the volume.
Caution:
Be sure to adjust the volume to the appropriate level while listening to sound through the headset.
80
UHK-430/CCU-430 1710 VER2 (E)
Advertisement
Table of Contents
