Table of Contents
Advertisement
7.10 12G SDI option
7
Insert the 12G_OUT module and fix it to CCU.
8
Insert the TRX_VP module into the CCU. Be sure
not to pinch the yellow optical fiber on the left side.
9
Install the front cover after installing the module
retainer to the CCU.
Turn on the main power of CCU. Open the CCU MENU and check if the OPTION is enabled.
INFORMATION → OPTION
190
① ⑨
If 12G_OUT is set to ENABLE, the optional module should be
recognized and the functions are enabled.
UHK-430/CCU-430 1710 VER2 (E)
① ⑧
Advertisement
Table of Contents
