Table of Contents
Advertisement
■ Auto White Balance
The auto white balance can be performed from camera or CCU front menu operation display and from the OCP or MCP. This
section explains how to perform auto white balance from the OCP.
1
Select a memory to save execution results of auto white balance using the AWB selector switch.
Note:
The previously saved data will be overwritten.
2
Selects color filter and ND filter according to the light source.
3
Shoot the subject which contains white color.
4
Press the AWB switch on the camera function operation panel of OCP to perform the auto white balance.
5
Check the results.
when completing the auto white balance.
Caution:
the control knob is not in the center position, the control range will be biased to one side.
Note:
UHK-430/CCU-430 1710 VER2 (E)
4.6 Auto Setup
ＡＷＢ Ａｃｈ
Ｏ Ｋ
73
4
Advertisement
Table of Contents
