Connecting The Ccu And Camera; Connecting The Camera Cable (Fiber Cable) - Ikegami CCU-430 Operation Manual

3.4 Connecting the CCU and Camera Head
3.4

Connecting the CCU and Camera

Connecting the Camera Cable (Fiber Cable)

Camera rear view
LIGHT RET 1 RET 2 TALLY CALL
4 4
3 3
ON ON
2 2
OFF OFF
DIM DIM
1 1
INCOM SEL
REAR
INCOM 1 INCOM 2
FRONT FRONT
INCOM INCOM
PGM 1 PGM 2 PGM 1 PGM 2
ON PROD ON PROD
OFF BOTH OFF BOTH
PTT ENG PTT ENG
INTERCOM 1 INTERCOM 2
GL IN/SYNC OUT
DC OUT
12V 1A
SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI I/O 4
OFF OFF REMOTE
USB
+12V +48V +12V +48V
TRACKER
DC-IN
11~17V
GbE TRK
MIC 1 MIC 2
1
Connect the CAMERA connector on the back of the CCU and the CAMERA connector on the back of the camera
with a fiber cable (hybrid fiber camera cable).
Caution:
- The camera cable has a male plug connector on one end and a female socket connector on the other end. Be sure to connect
the female plug connector to the camera and the female socket connector to the CCU.
Cable clamp
52
CCU rear view
Camera connector
Fiber cable
UHK-430/CCU-430 1710 VER2 (E)
Camera connector
CAMERA
AES OUT SYNC OUT DATA TRK-1 TALLY
Cable clamp
(option)
RET-1 RET-2
/MIC
Fiber cable