Switching The Video Gain (Step Gain) - Ikegami CCU-430 Operation Manual

5.6 Setting the Items Controlled from OCP
3
Select "DIGITAL EXTENDER MODE" from the
"VIDEO ADJUSTMENT" sub menu screen.
4
Select "MAGNIFICATION" from the "DIGITAL
EXTENDER MODE" sub menu to set the
magnification.

Switching the Video Gain (Step Gain)

of the camera according to the brightness of the subject. It can be switched from OCP-300 (Operation Control Panel).
1
Press the "SETUP" switch among the FUNCTION
switches of OCP-300 to display the "SETUP"
screen (1/2) on the OCP-300 LCD screen.
2
Select "ON/OFF CTRL" from the "SETUP" screen
(1/2) to display Page 1/6.
3
Use the " " switch on the LCD screen to display Page 6/6.
4
Turn the rotary encoder knob under the "GAIN" display on the LCD screen to select the step gain.
Caution
Setting the step gain exceeding "12dB" is an optional item. So, it may not be operable.
124
UHK-430/CCU-430 1710 VER2 (E)