Table of Contents
Advertisement
3.3 Connecting the CCU and Camera Head
5
Lower the camera front wedge into its slot, and
tighten the lock lever to fix the camera.
lock lever is locked.
6
Secure the camera on the tripod so that it does not
rattle.
Caution:
If the camera and tripod rattle, the camera may fall off,
resulting in damages or injury.
abnormality in the front/back edge, mounting brackets,
and tripod.
okay.
7
Loosen the Tilt lock and Pan lock to adjust the tilt
and direction of the camera.
The friction is less when the Pan brake and Tilt brake
are turned to the direction with a small number, so the
camera moves smoothly. On the other hand, the friction
is greater when they are turned to the direction with a
big number, so the camera does not rotate easily.
8
When the tilt and angle orientation of the camera
is determined, tighten the Tilt lock and Pan lock to
secure it.
40
Lock
5：Tighten the lock lever to fix the camera.
Camera right view
Pan lock
7：Loosen the Tilt lock and Pan lock to
Tilte brake
8：Tighten the Tilt lock and Pan lock
UHK-430/CCU-430 1710 VER2 (E)
Lock lever
Tilt lock
adjust the tilt and angle orientation
of the camera.
Pan brake
0 1 2 3 4 5 6 7
Loosen
Tighten
to secure it.
Advertisement
Table of Contents
