Operating From Ccu Main Unit - Ikegami CCU-430 Operation Manual

6.1 Basic Operation of Menu Screen

■ Operating from CCU Main Unit

1
Set the MENU switch "OPE - OFF" to "OPE" side.
2
When the MENU operation dial is kept pressed for
approximately three seconds, the Main menu screen is
displayed on the PM screen.
3
Check that the main menu screen is displayed on the
PM screen, and turn the MENU operating knob to move
the flashing cursor to the setting item. Then, press the
knob (SET button).
4
Display the sub menu, and perform various settings.
Caution:
Depending on the function of the setting item, there are items that the
setting is changed when the dial is turned or when the SET button is
pressed.
5
Exit the menu screen in the any of the following methods :
- Select " " on the CCU main menu and press the Enter switch.
- Set the MENU switch "OPE - OFF" to the "OFF" side (CCU).
134
ID
MENU operating knob
SET button
PM screen
UHK-430/CCU-430 1710 VER2 (E)
CABLE STATUS ALARM CAM:400V T5A
NORMAL OPEN SHORT COMM TEMP FAN
TALLY
OPT RX LEVEL CCU STATUS
CAM
GENLOCK APC SDI
CCU
INTERCOM MENU
CAM
PHONE
MIC PRV OPE
ON
OFF
PTT
COM OFF
USB
INIT/PM CALL
MENU
OPE
OFF
POWER
CCU
MENU switch