Video Adjustment - Ikegami CCU-430 Operation Manual

■ VIDEO ADJUSTMENT

Sets the functions that perform video signal processing automatically or manually.
[AUTO SETUP MODE]
Menu Item
AUTO SETUP MODE
― AUTO SETUP LEVEL
― FULL AUTO REF INT
― AWB WITH A.IRIS ON
― SMOOTH AWB
― AWB REFERENCE ON
― ABS MODE
― CHART SEARCH
REFERENCE SET
[PROCESS SETUP]
Menu Item
PROCESS SETUP
― MASTER GAMMA
0.0
― MASTER PED 0.0
― MASTER FLARE 0.0
― DTL GAIN 0.0
― MANUAL CLR
― SMOOTH STEP GAIN
― GAMMA TYPE
― MATRIX 1
― ADVANCED MATRIX OFF
― HV SLIM DTL TYPE
― V SLIM DTL FREQ
― NR MODE OFF
DOWN CONV FILTER STD
Caution:
Initial
Setting value
setting
LEVEL,FULL,QUICK,
INT, EXT
ON, OFF
OFF,ON-0.3s,
ON-0.7s,
ON-1.0s,
ON-2.0s
ON, OFF
Initial
Setting value
setting
-100 to +100
-100 to +100
-100 to +100
-100 to +100
ON-0.3s,
ON-0.7s,ON-1.0s,
ON-2.0s,
OFF
1, 2, 3, OFF
ON, OFF
STD, HI, HQ, LOW
UHK-430/CCU-430 1710 VER2 (E)
5.3 Menu Configuration and content
Description, Remarks
This menu is enabled only during the self contain operation.
It is always "OFF" during the CCU operation.
REF.
SETUP is performed.
Description, Remarks
Sets the master gamma value.
The gamma value decreases in the direction of "-100" and increases in the
direction of "+100".
Sets the master pedestal value.
The pedestal value decreases in the direction of "-100" and increases in the
direction of "+100".
Sets the master flare value.
The flare value decreases in the direction of "-100" and increases in the direction
of "+100".
Sets the detail amount.
The detail amount decreases in the direction of "-100" and increases in the
direction of "+100".
as a group.
Possible to choose the time until convergence.
Selects the type of gamma curve.
There are independent settings for three channels of the matrix, which can be
switched.
Turns on/off the advanced matrix.
Sets the type of SLIM DTL.
Sets the boost frequency type of SLIM DTL.
Sets the NR (noise reducer).
Sets the FIR-FILTER for converting 4K video to HD (1080i / 1080p).
5
101