Displaying The Main Menu - Ikegami CCU-430 Operation Manual

5.2 Basic Operation of the Menu

■ Displaying the Main Menu

Follow the instructions below to display the menu.
1
Press the "VF CHAR" switch and SET button on
the right side of the camera for simultaneous to
display the main menu screen of MAIN MENU (TO
MENU).
2
Turn the menu select knob in the menu on the
right side of the camera to move the cursor mark
of the main menu screen to the setting item.
3
Press the "SET button" on the right side of the
camera to change the screen to the sub menu
screen of the setting item selected.
In this example, the screen was changed to the sub
menu screen of "VIDEO I/O".
4
Turn the menu select knob in the menu on the
right side of the camera to move the cursor mark
of the sub menu screen to the setting item. Then,
the item where the cursor was moved to flashes.
5
Press "SET button" on the right side of the
camera, then the setting value of the setting item
flashes. Turn the menu select knob to change the
setting value.
[Example]
VF MAIN RETURN
6
Press "SET button" when the desirable setting value
is displayed to confirm it. When the setting value is
confirmed, the screen is returned to the sub main
menu.
7
To return to the main menu half way through the
setting, move "cursor mark" to "return mark" and
press "SET button
Caution:
If you do not press the SET button after changing the mode
setting, the change may be effective.
Note:
- Select " " and press the SET button to return to the main
menu.
- The pages of the "top menu screen" and "sub menu screen"
with multiple items are changed directly with their cursor
marks.
- The "menu select knob" and "SET button" on the right side of
can be used.
82
Cursol mark
Return mark
UHK-430/CCU-430 1710 VER2 (E)
Frash display