The Setting Status Of The Camera Loaded From The Usb Memory - Ikegami CCU-430 Operation Manual

■ The setting status of the camera loaded from the USB memory.

Read the camera setting condition from the USB memory.
1
Use the menu select knob in the "MAIN MENU"
to move the cursor to "FILE OPERATION".
Then press the SET button to display the "FILE
OPERATION" sub menu..
2
Select "USB MEMORY" and press the SET button.
3
Select the operation items performed from the sub
menu of "USB MEMORY".
4
Select the items you wish to load from the sub
menu of LOADFILE.
5
After selecting the item to be read to the camera,
press the SET button.
Then select whether to read all files or individual
files from No. 1 to No. 8. In the example in the
figure, No. 8 is selected. Then select a file stored
on the USB memory.
After the contents are determined, [PUSH SET ->
START] is displayed. Press the SET button.
If you wish to cancel, turn the menu select knob
when [PUSH SET -> START] is displayed.
Note:
6
When the file is being saved, [LOADING
FILE] is displayed. If the file is saved normally,
[COMPLETE] is displayed.If ALL FILE and MENU
DATA have been read, the camera is automatically
restarted after display of [COMPLETE].
Caution:
being written to the USB memory. Removing it at this time could damage the USB memory data or the USB memory itself.
Caution:
UHK-430/CCU-430 1710 VER2 (E)
5.5 Using the USB Memory
119
5