Camera And Peripheral Installation And Connection; Mounting/Removing The Camera On/From The Tripod - Ikegami CCU-430 Operation Manual

3.3

Camera and Peripheral Installation and Connection

Mounting/Removing the Camera on/from the Tripod

■ Mounting the Camera on the Tripod
This section explains how to install the camera on the tripod. There are various types of tripods depending on the application and
purpose. See the user's manual of your tripod for details on the tripod. This section is based on using a VIDEO-18 as an example.
1
Loosen the fixing knob and extend the tripod legs.
2
Check the level gauge on the pan head, and adjust
the ball mount for a level head.
3
Check that the Tilt lock and Pan lock are secured.
If the locks are not secured or loose, tighten them.
Caution:
product on the tripod.
If the tripod is not stable, the camera may fall off when
mounting, resulting in damages or injury.
4
Attach the tripod plate to the pan head. Insert the
edge of the rear wedge of the camera into the slot
on the mounting plate.
Push it toward the rear, to hook the edge.
1, 2:
Lock the legs after
adjusting the
height
Pan lock
3：
Make sure the
tikt lock and
pan lock are
locked.
Camera right view
Camera front wedge
Insert the
camera wedges.
Mount plate
UHK-430/CCU-430 1710 VER2 (E)
3.3 Connecting the CCU and Camera Head
Tripod
Fixing knob
INCOM/ND FILTER
HEAD
F1
F2
PGM/CC VF
CHAR
MIC
MENU
CCU
OFF
EXT
POWER
3
Tilt lock
Camera
rear wedge
39