Table of Contents
Advertisement
Attaching a Microphone
The camera supports connection of two microphones (MIC-1 and MIC-2), depending on the application.
Note:
The microphone holder is optional.
1
Check if a microphone holder is attached
to the viewfinder.
If a microphone holder is not attached,
attach the holder to the microphone holder
2
Loosen the microphone fixing screw on
the microphone holder to open it.
3
Put the microphone in the opened
microphone holder and tighten the screw
to secure it in place.
4
Connect the microphone cable to the
MIC-1 connector on the back of the
camera.
(Same for the MIC-2 connector.)
5
Secure the microphone cable with the
cable clamps to remove any slack.
Reference:
The power supply method is different depending on the types of the microphone used. Please refer to "Chapter 4 :
OPERATION" "4.2 Switch Position Check" (P. 60) for switching the power supply.
Microphone
holder
2 Open the microphone holder
Open
Close
UHK-430/CCU-430 1710 VER2 (E)
3.3 Connecting the CCU and Camera Head
Screw
3
47
Advertisement
Table of Contents
