Table of Contents
Advertisement
3.3 Connecting the CCU and Camera Head
Mounting and Removing the Lens
■ Mounting the Lens
This section explains how to mount the lens to the camera.
1
Lift the Lens lock lever and remove the lens cap in
advance.
2
Align and horizontally insert the pin of the lens into
the notch of the camera lens mount.
Put a hand on the lens to prevent it from falling.
3
Secure the lens to the camera.
Push down the Lens lock lever to secure the lens to the
camera.
4
Connect the pigtail cable to the lens connector.
The pigtail cable is automatically locked when it is
aligned with the connector pin and pushed in.
5
Secure the pigtail cable to the cable clamp so the
cable is properly positioned.
Caution:
Do not hold and carry the entire camera by the housing
cause failure.
42
2 Align and insert it into the notch.
4 Connect the pigtail cable.
UHK-430/CCU-430 1710 VER2 (E)
3 Push down the Lens lock
lever to secure the lens.
5 Secure it to the cable clamp.
Advertisement
Table of Contents
