Table of Contents
Advertisement
Caution
Insertion/removal method of the rear-side module
When installing an option module, consult with our engineer or the sales agency's engineer. If the customer installs a module on his
own, please fully understand that there is a risk of module damage and take the following procedure.
Do not touch the printed board and individual components of the module.
[Preparation] Discharge any static electricity in your body and wear a grounding wrist band.
1
Turn off the main power of the CCU.
2
Remove the cover on the front side of the CCU.
3
Remove the module retainer from the CCU.
4
Pull the card puller of the TRX_VP module toward
you and release the locks at the same time. Be
sure not to pinch the yellow optical fibers on the
left side.
5
Pull the TRX_VP module about 5cm toward you.
6
Remove the screws fixing the VP_OUT module on
the back side of the CCU to take the module away
from CCU.
① ④
UHK-430/CCU-430 1710 VER2 (E)
7.10 12G SDI option
③
① ④
① ⑤
①
7
189
Advertisement
Table of Contents
