Table of Contents
Advertisement
■ VIDEO I/O
Sets the assignment of video signals for input/output connector of the camera.
Menu Item
SDI OUT1 SEL
SDI OUT2 SEL
SDI OUT3 SEL
SDI I/O4 SEL
BARS MODE( E)
BARS( E)
Caution:
Initial
Setting value
setting
RET-1, RET-2, RET-3,
RET-4, HD Q-TV1, HD
VF
Q-TV2, VF, MON, RET-1
SEL, RET-2 SEL
RET-1, RET-2, RET-3,
RET-4, HD Q-TV1, HD
VF
Q-TV2, VF, MON, RET-1
SEL, RET-2 SEL
RET-1, RET-2, RET-3,
RET-4, HD Q-TV1, HD
VF
Q-TV2, VF, MON, RET-1
SEL, RET-2 SEL
RET-1, RET-2, RET-3,
RET-4, HD Q-TV1, HD
VF
Q-TV2, VF, MON, RET-
1 SEL, RET-2 SEL, HD
TRUNK
Setting
FULL, MULTI
value
OFF
ON, OFF
UHK-430/CCU-430 1710 VER2 (E)
5.3 Menu Configuration and content
Description, Remarks
Sets the signals outputted from the SDI OUT1 connector.
When they are set to RET-1 SEL and RET-2 SEL, they are linked to RET-1/RET-
2 selector switch on the back.
Sets the signals outputted from the SDI OUT2 connector.
When they are set to RET-1 SEL and RET-2 SEL, they are linked to RET-1/RET-
2 selector switch on the back.
Sets the signals outputted from the SDI OUT3 connector.
When they are set to RET-1 SEL and RET-2 SEL, they are linked to RET-1/RET-
2 selector switch on the back.
Sets the signals outputted from the SDI OUT4 connector.
When they are set to RET-1 SEL and RET-2 SEL, they are linked to RET-1/RET-
2 selector switch on the back.
Only SDI I/O4 can be set to the HD TRUNK input.
5
97
Advertisement
Table of Contents
