Table of Contents
Advertisement
5.5 Using the USB Memory
7
When the file is being saved, [SAVING FILE...] is
displayed.
If the file is saved normally, [COMPLETE] is
displayed.
Caution:
Never remove the USB memory from the slot during
indicator is lighted, as data is being written to the USB
memory. Removing it at this time could damage the
USB memory data or the USB memory itself.
M1
If a file with the same file name exists on the USB
memory, a message is displayed asking whether it
is all right to write over the data. To enable writing
over of data, change [NO] to [YES] and press the
SET button. If [NO] has been selected, storage is
cancelled and the system returns to step [3].
Note:
118
UHK-430/CCU-430 1710 VER2 (E)
ALL FILE
SNAPSHOT FILE
Parameters for adjusting
functions and ON/OFF state.
SCENE FILE
REFERENCE FILE
(ABB/AWB)
LENS FILE
MENU FILE
LOG DATA
Advertisement
Table of Contents
