Table of Contents
Advertisement
5.3 Menu Configuration and content
[CUSTOM GAMMA]
Menu Item
CUSTOM GAMMA
― EASY MODE
― DEFAULT RESET
― SELECT
― CURVE TYPE
― INITIAL GAIN
― 18% GRAY
― DYNAMIC RANGE
― WHITE LIMIT
― CAL
SAVE
― FLEXIBLE MODE
― DEFAULT RESET
― SELECT
― POINT
― WIDTH
― LEVEL
CAL
― SHUTTER
― SHUTTER SPEED
― SUPER V
― GAMMA CURVE COPY
― USB MEMORY
― SAVE
LOAD
DIGITAL EXTENDER MODE
― DIGITAL EXTENDER
MAGNIFICATION
102
Initial
Setting value
setting
-
1.0 to 9.0
OFF
0
-100 to +100
OFF
OFF, PRESET,
OFF
PRESET
---
1/1000, 1/2000
OFF
OFF, ON
---
---
---
OFF
OFF, ON
UHK-430/CCU-430 1710 VER2 (E)
Description, Remarks
Easy creation mode. Sets various parameters and creates the custom gamma data.
Returns to the original custom gamma data.
function.
Selects the gamma table to be created.
Sets the basic properties of gamma curve.
The curve rises steeply as the value increases.
Sets what level it should be after the gamma has been applied when converting
Sets the maximum level (the maximum input level to the gamma) before the
gamma has been applied.
Sets the white clip after the gamma has been applied.
Saves the data that has been created.
The data is temporary unless you save it.
Therefore, the data will be cleared if you end the menu without saving it.
Resets the custom gamma data created.
Selects the gamma table to be created.
Sets the video level before gamma.
the video level for adjustment.
curve with a smooth curve can be created focusing around the point.
Selects the electronic shutter.
Switches the shutter speed.
Sets the ON/OFF of the SUPER V.
Copies the custom gamma data created to other gamma table in the camera.
Saves the custom gamma data to the USB memory.
Loads the custom gamma data from the USB memory.
Sets the ON/OFF of the digital extender.
Sets the magnification of the digital extender.
Advertisement
Table of Contents
