Table of Contents
Advertisement
2.1 Camera and Viewfinder
Name and Function of the Camera Left Side
■ Name of the Camera left side
10
Fiber Cable Clamp
9
CAMERA
Connector
8
MIC Cable Clamp
■ Function of the camera left side
(1) Shoulder Belt Hooks
Hooks to be used to attach a shoulder belt (option).
Reference:
Please refer to "Chapter 3 : INSTALLATION and CONNECTION" "3.3 Camera and Peripheral Installation and
Connection" "Attaching a Shoulder Belt" (P. 50) for more information.
(2) VF Connector
Used to connect a VF cable.
(3) VF Cable Plug
connector, press in on both latches and then remove it.
(4) SDI OUT
Outputs the same video signal as the SDI OUT 3 connector.
(5) VF Cable Clamp
(6) RET-2/MIC Button
function at the side of the camera.
● When set to RET-2
The video of view finder is switched from the video of the camera to the RET-2 video while this button is pressed.
● This button is used to turn on the microphone of intercom when "ENG" or "PROD" is selected using the INTERCOM
FRONT VR selector switch on the back of the camera.
While this button is pressed, the intercom microphone is turned on.
16
VF Cable Plug
3
7
RET-1 Button
UHK-430/CCU-430 1710 VER2 (E)
2
VF Connector Selectable
Shoulder Belt Hooks
1
4
SDI OUT
5
VF Cable Clamp
RET-2
RET-1
/MIC
6
RET-2/MIC Button
Advertisement
Table of Contents
