Table of Contents
Advertisement
1.3 Operating Systems
1.3
Operating Systems
This product is equipped with interface functions with a control panel and control unit.
combination of SE-U430 System Extender.
Each control panel to be connected to the CCU can be selected and operated depending on
the use.
■ Example of Minimum Configuration of System Camera (1 camera, 1 OCP)
Camera
INCOM/ND
FILTER
HEAD
F1
F2
PGM/CC
VF
CHAR
MIC
MENU
CCU
OFF
EXT
POWER
■ Example of System Camera Configuration (Up to 8 cameras, 1 MCP)
Camera
INCOM/ND
FILTER
HEAD
F1
F2
PGM/CC
CHAR
VF
MIC
MENU
CCU
OFF
EXT
POWER
Camera
INCOM/ND
FILTER
HEAD
F1
F2
PGM/CC
VF
CHAR
MIC
MENU
CCU
OFF
EXT
POWER
6
MONITOR
CAMERA
COMM
CCU-430
HD-SDI
MONITOR
HD-SDI
CP cable
CAMERA
COMM
CCU-1
CCU-430
CP cable
CCU-8
MONITOR
CAMERA
COMM
CCU-430
UHK-430/CCU-430 1710 VER2 (E)
HD-SDI
PM
WFM
OCP
CP cable
PM
OCP
PM
OUT
WFM
MCP
CSU
*1
PM
OCP
Note:
- By combining the Camera with
SE-U430 system expander
(option), it can be mounted as a
full-scale studio camera with 7
studio lens
Note:
For Minimum operating System,
no MCP needed when OCP-300
is used.
If the MCP-300 is used,
required. Please refer to the
operation manual of MCP-300 for
power supply.
Term:
OCP (Operation Control
Panel)
This control panel is used for
normal operation. Typically one
OCP is dedicated to one camera
chain.
Term:
MCP (Maintenance Control
Panel)
This control panel is used for
the maintenance and precise
adjustment of the camera in
studio shooting. By using a
memory card, you can save the
shooting condition on memory
and make setup easily. By using a
CSU together with an MCP, you
can maintain up to 32 cameras.
Term:
CSU (Camera Select Unit)
Used when controlling multiple
cameras. With using a MCP,
one CSU can control up to 8
cameras, and contains terminals
through which video is output
on the monitor from the selected
camera.
Caution:
*1 HD-SDI option must be
installed to monitor using
CSU.
Advertisement
Table of Contents
