Table of Contents
Advertisement
■ Removing the Lens
This section explains how to remove the lens from the camera.
1
Remove the pigtail cable from the lens connector.
Pull on the connector ring of the pigtail cable to release
the lock and remove the connector.
2
Remove the lens from the camera.
Push down the Lens lock lever and remove the lens
direction.
Put a hand on the lens to prevent it from falling.
3
Remove the pigtail cable from the cable clamp.
4
Attach the lens cap at the lens opening when no
lens is mounted.
4 Remove the pigtail cable.
UHK-430/CCU-430 1710 VER2 (E)
3.3 Connecting the CCU and Camera Head
5 Remove the pigtail cable
from the cable clamp.
3
Push up the Lens lock lever
to remove the lens.
3
43
Advertisement
Table of Contents
