Setting The System Setting (2/2) - Ikegami CCU-430 Operation Manual

■ Setting the SYSTEM SETTING (2/2)

devices.
[VIDEO PROCESS] [HD VIDEO PROCESS] [RET VIDEO FORMAT] [PHASE CONTOROL]
Setting Item
VIDEO PROCESS
― UHDK 4K COLOR BARS
― HDTV COLOR BARS
― ARIB BARS TYPE
SMPTE BARS TYPE
HD VIDEO PROCESS
― DOWN CONV FILTER
HD CUTOUT
RET VIDEO SETTING
― RET1
― RET2
― RET3
― RET4
ACTIVE-THROUGH
PHASE CONTROL
― 4K V PHASE
― HD OUT-1 V PHASE
― HD OUT-2 V PHASE
― HD OUT-3 V PHASE
― HD OUT-4 V PHASE
― HD TRUNK V PHASE
― 4K H PHASE
― HD OUT-1 H PHASE
― HD OUT-2 H PHASE
― HD OUT-3 H PHASE
― HD OUT-4 H PHASE
― HD PM H PHASE
― HD TRUNK H PHASE
― SYNC OUT V PHASE
SYNC OUT H PHASE
Caution:
-
-
output video signals will not be outputted unless the power of CCU is turned on.
-
not automatically changed to "FS OFF". If FS is not required, turn it off manually.
Initial setting Setting value
4K 709
SMPTE
---
STD STD, HI, HQ, LOW
OFF, OUT-3,
OFF
OUT-4, OUT-3/4
FS OFF FS ON/OFF
FS OFF FS ON/OFF
FS OFF FS ON/OFF
FS OFF FS ON/OFF
OFF OFF / ON
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
UHK-430/CCU-430 1710 VER2 (E)
6.2 CCU Menu Configuration and Contents
Description, Remarks
Sets the video systems.
Sets the HDTV video system. *2
Selects FIR-FILTER for converting 4K video to HD (1080i / 1080p).
Sets the assignment of HD CUTOUT outputs. The lines for which
CUTOUTS are not assigned are D/C outputs.
Sets the RETURN VIDEO. *3
RET-2 is the output of RET-1, and RET-4 is the output of RET-3.
6
141