Ikegami CCU-430 Operation Manual page 82

4.3 Turning ON Power
3
Connect the connector from an external power supply to the DC IN connector on the back of the camera.
Connect the camera cable from CCU to the camera connector on the back of the camera.
4
Turn on the CCU power supply.
5
Turn on "FIBER SINGLE MODE" in the CCU Menu setting.
Reference:
Please refer to "6.1 Basic Operation of Menu Screen" (P. 131) and "6.2 CCU Menu Configuration and Contents",
"Setting the SYSTEM SETTING (2/2)", "CONFIGURATION" (P. 143)
6
Turn on the camera power switch of the CCU side.
7
Turn on the external power switch.
8
Turn the POWER switch on the right side of the camera to the "EXT" postion.
64
LIGHT RET 1 RET 2 TALLY CALL
4 4
ON 3 3 ON
2 2
OFF OFF
DIM 1 1 DIM
INCOM SEL
REAR
INCOM 1 INCOM 2
FRONT FRONT
INCOM INCOM
PGM 1 PGM 2 PGM 1 PGM 2
ON PROD ON PROD
OFF BOTH OFF BOTH
PTT ENG PTT ENG
INTERCOM 1 INTERCOM 2
GL IN/SYNC OUT
DC OUT
12V 1A
SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI I/O 4
OFF OFF
USB REMOTE
+12V +48V +12V +48V
TRACKER
DC-IN
11~17V
GbE TRK
MIC 1 MIC 2
DC Power cable
FILTER
INCOM/ND
HEAD
F1
F2
PGM/CC VF
CHAR
MIC
MENU
UHK-430/CCU-430 1710 VER2 (E)
Fiber cable
CCU
OFF
EXT
POWER
POWER
CCU
OFF
EXIT