5.4 Creates the Lens File
5.4
Creating a Lens File
and automatically change it by the answer signal from the lens.
■ Preparation for creating a lens file
adjust the lighting using a light meter to make sure the brightness of the entire chart is uniform.
Note:
lighting or chart is changed, it is impossible to identify whether the deviation is due to the lens or lighting/chart.
Chart on which Kent paper, etc. has been pasted
and the entire surface is a uniform white.
Illumination
meter
Light
112
Light
Picture monitor
(connect if required)
UHK-430/CCU-430 1710 VER2 (E)
Camera
SDI OUT connector
Tripod
WFM
Coax cable