Table of Contents
Advertisement
SAFETY PRECAUTIONS
Regarding the Product
Do not lift or hold the camera by the projection parts.
exposed to unnecessary pressure, which may cause equipment damage.
table, a tripod, etc.).
- Extremely high/low temperature
- In direct sunlight for a long time, or near a heater
- High humidity or dusty
- Exposed to water or other liquid
- Strong vibration or shock
- lightning
- In rain without the rain cover
Regarding the Product
Be sure to hold the plug and pull when you disconnect the cable.
Condensation may occur in the optical block or other area of the camera.
Do not drop or insert a metal object such as a pin or a foreign object into the equipment.
Do not spread or spill water or other liquid on the equipment.
Do not subject the equipment to a strong shock or vibration.
Doing so may cause damage or malfunction of the equipment.
Since CMOS sensors are element is adopted as the imagers sensor in picture elements, no burning
occurs in ordinary operation. However, when shooting a subject which emits an excessive amount
of light (Sun, laser light, etc.) for long hours, take great care for temperature increase inside of the
sensors.
Laser beams may damage the sensors. If you shoot a scene that includes a laser beam, be careful
not to let a laser beam become directed into the lens of the camera.
Before connecting an accessories, make sure that the camera and equipment to be connected are
Excessive sound pressure from the headset may cause a hearing loss.
Regarding the Power and the Lithium Battery
Use the product in compliance with the rating of the fuse within the product and that within the
product (Camera and CCU). Otherwise, a fault can occur.
When changing or discarding a battery, please contact Ikegami's sales and service centers.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
the instructions.
vi
UHK-430/CCU-430 1710 VER2 (E)
Advertisement
Table of Contents
