Initializing The Settings Of This Product - Ikegami CCU-430 Operation Manual

8.4 Initializing the Settings of this Product

8.4 Initializing the Settings of this Product
(1) Initializes the camera back to the user setting (ENGINEER SET FILE).
conditions.
Use the Menu screen to change the settings. The setting method is described below.
Set Value
FILE SELECT ENGINEER (default)
FACTORY
LOAD START READY (default)
START
CANCEL
■ Initialization of the Camera
1
Turn the menu operation knob in the MAIN
MENU (TOP MENU) to move the cursor to "FILE
OPERATION". Then press the ENTER button to
display the sub menu.
2
Turn the menu operation knob to position the
cursor on "PRESET FILE LOAD", and press the
ENTER button.
3
Turn the menu operation knob to position the
cursor on "FILE SELECT", and press the ENTER
button.
The cursor moves to the mode selection column.
4
Turn the menu operation knob to select the value
(ENGINEER, FACTRY) to be set, and press the
ENTER button.
204
Initializes the state back to the user setting.
Initializes the state back to the initial factory setting.
The state before initialization
Starts initialization.
Cancels initialization.
UHK-430/CCU-430 1710 VER2 (E)
Description
continues to the next page