Setting Of Ccu Menu; Setting Of Preset File - Ikegami CCU-430 Operation Manual

6.3 Setting of CCU Menu

6.3 Setting of CCU Menu
Explains the CCU menu item operating of OCP-MCP-300 and CCU front side.

■ Setting of PRESET FILE

Move to the flashing cursor
to "PRESET FILE LOAD"
and confirm.
PRESET FILE Setting Menu
Menu
PRESET FILE LOAD
― FILE SELECT
― FILE SELECT
PUSH SET ---> START
CAMERA MENU
1
Set the blinking cursor to FILE SELECT and select a target file to transfer (LOAD) the data.
2
- When "CANCEL" is selected, the setting is canceled, and the status returns to "READY" status.
- When "START" is selected, "PUSH SET ---> START" is displayed at the lower section of the screen. When
"START" is selected, proceed to Step 3.
3
While "PUSH SET ---> START" is selected, finalize the operation. The data transfer (LOAD) starts.
CCU re-start automatically, and the operation completes.
Sub menu screen
Move to the flashing cursor to
"LOAD START" and confirm.
144
Main menu screen
Initial setting Setting value
Sub menu screen
When "START" is selected, the
message is displayed in the
bottom of the screen.
UHK-430/CCU-430 1710 VER2 (E)
Sub menu screen
The submenu "PRESET
FILE LOAD" is displayed.
Description, Remarks
Preset file load
Displays "Camera Power OFF" when the power of camera is turned off.
Item setting screen
"FAIL-SAFE DATA LOAD
COMPLETED" is displayed in
the middle of the screen, and
then restart.