Regarding the Fiber Connector and the Fiber Cable
thoroughly check male or female, the diameter, type and manufacturer of connectors.
If the ferrule is dirty, wipe the dirt off with cotton swabs soaked in alcohol.
force to bend, twist, or damage the cable, and take great care when handling.
Regarding the Camera Connector and the Fiber Cable
connector (plug) and not the cable.
- Do not crush the cable.
- Since there can be various obstacles (such as a corner of a building, glass, rough ground
surface) in places where the cable is connected, do not drag the cable without winding.
Cable Clamp
to dust, etc. Hence, if the camera is not in use, be sure to put the attached connector cover to
prevent from the dust.
UHK-430/CCU-430 1710 VER2 (E)
SAFETY PRECAUTIONS
Radius
Approx. 60mm
Fiber Cable
RET-1
RET-2
/MIC
Cable Clamp
(optional)
Fiber Cable
vii