Table of Contents
Advertisement
■ Operation from the operation control panel (OCP-300)
The position of the cutout video is set from the OCP-300.
- Corresponding remote controller
Select a preset cutout position. The switch for the currently selected cutout position turns yellow. Five cut-out positions (center,
upper left, upper right, lower left, and lower right sections of the screen) and the entire screen (CUTOUT OFF = Down-converting
output) can be selected.
- Saving and recalling the user memories
When recalling a memory, press either MEM1, MEM2, or MEM3.
Selection of preset position
Saving and recalling the
user memories
Setting the x-axis and y-axis
of the cutout position
UHK-430/CCU-430 1710 VER2 (E)
7.9 Simultaneous option
173
7
Advertisement
Table of Contents
