Table of Contents
Advertisement
2.3 CCU-430
(12) SDI OUT (HD video output)- 3, 4 connector
Outputs two HD signals.
(13) SDI OUT (Main line video output)- 1, 2 connector
Outputs two 4K/HD video signals.
(14) Gigabit ETHERNET TRUNK connectors
2
(15) HD RETURN IN (Return video input) connectors
Inputs return signals to the Camera.
(CH2 and CH4).
(16) HD QTV IN connectors
Inputs the HD-SDI QTV, SMPTE 292M, video signal (for promter) to be sent to the camera.
(17) HD TRUNK OUT connector
It outputs the HD-SDI TRUNK signal from the camera.
(18) MON OUTPUT (Monitor video output) connector
Connects to the picture monitor (PM), etc.
(19) REFERENCE (Synchronization signal) connector
It inputs the
(20) LAN connector (Ethernet RJ45 (8P8C)
Connects the network compatible remote controller via HUB.
(21) OCP connector
Used to connect CCU and OCP. They are connected with a CP cable.
Equivalent to CSU connector mentioned in (22), and possible to connect to CSU.
(22) CSU connector
Connects CSU with a CP cable.
Equivalent to CSU connector mentioned in (21), and possible to connect to CSU.
(23) REMOTE connector
This is a connector used to externally control the microphone volume of the camera.
(24) I/F connector
(25) Communication connector
Refrence:
Refer to Chapter 9 for terminal sequences of a connector for external connection and terminal functions.
UHK-430/CCU-430 1710 VER2 (E)
33
Advertisement
Table of Contents
