Table of Contents
Advertisement
■ SYSTEM
Performs various settings for the basic operation of the camera.
Menu Item
SYSTEM
SCAN MODE
H PHASE
FILTER SERVO CONT
BATT WARN VOLT
CAMERA ID SETUP (E)
PROGRAM NO. (E)
ID NO. (E)
FIBER SINGLE MODE
CONT (E)
SIMUL MODE (E)
DATE(YY/MM/DD) (E)
TIME (E)
Initial
Setting value
setting
Delivery
destination
Set
0.0
-100 to +100
SERVO
11.0V
1
1 to 99, OFF
1
1 to 40
OFF
ON, OFF
---
---
UHK-430/CCU-430 1710 VER2 (E)
5.3 Menu Configuration and content
Description, Remarks
Selects the camera operational configuration. (It can be set only for self-
operation.)
can be set only for self contain operation.)
Sets the battery voltage value that issues the warning.
Sets the camera No. at the time of program operation, etc. If the display of the
camera No. is set on the OCP side, the set ID No. is displayed. If the camera No.
is set on the camera side, the set ID No. is displayed on OCP.
Sets ID No. of the camera. Sets this when you want the camera No. to be detected
and displayed on the CCU side.
Supplies power to the camera from an external power supply DC connector with
CCU connected. So, stop the power supply from the optical cable.
If it is sets to "ON," the mode is switched to the single fiber mode.
Selects SIMUL MODE.
In this mode, parameters related to color adjustment function (Color) and
outline correction function (Detail) can be individually set in 4K output and
HD output. Other controls are multi-link settings.
and HD outputs.
OFF
4The 4K and HD outputs are controlled by common adjustment parameters.
Sets the date and time for saving files to a USB memory.
Sets the date and time for saving files to a USB memory.
5
107
Advertisement
Table of Contents
