Mounting And Removing The Lens - Ikegami HDK-790GX Operation Manual

Mounting and Removing the Lens

- - -
Mounting the Lens
This section explains how to install a lens on the camera.
Be sure to place the camera on a tripod when you mount the lens. The BTA mount system is equipped as a standard lens mount for
the camera.
1
Lock the tilt lock of the cam head on the tripod and
fi x it securely so that the camera cannot move.
2
Turn the lock knob of the blind plate and release
the lock.
Remove the blind plate and lens cap from the camera.
3
Place a lens on the camera by hooking the guide
pin of lens in the wedge of camera. Align the
connectors of the camera and lens and push in
gently.
4
Turn the lock knob and fi x the lens.
If the balance of camera is not stable, refer to the user's
manual of the tripod to move the center of gravity of
the camera.
Reference:
Lens le
The lens code number is con gured by the switches
on the lens side. By creating a lens le in advance
according to the lens code number, the lens le can be
switched automatically when the lens is replaced.
See "5. Setting with menu function [FILE SET]" for
the method to set a lens code number of the lens and create a lens le.
- - -
Removing the Lens
This section explains how to remove a lens from the camera.
1
Lock the tilt lock of the cam head on the tripod and fi x it securely so that the camera cannot move.
2
Remove the lens in a reverse order of mounting procedure.
3.2 Camera and Peripheral Installation and Connection
Blind plate
Guide pin Guide pin Guide pin
V-wedge
Lens
Lens
Camera
HDK-790GX 1403 VER1 (U)
Wedge Wedge Wedge
Camera
Lock knob
Lens cap lens cap lens cap
Guide pin
Camera
Lens
Lock Lock Lock
Lock knob
3
39