Initializing The Settings Of This Product - Ikegami HC-HD300 Operation Manual

6.3 Initializing the Settings of this Product

The following two cases are available for initializing the setting of this product.
1. Initializes the camera back to the user setting (ENGINEER SET FILE).
This initializes the camera back to the state set by user engineer in advance in response to the environment and the shooting
conditions.
2. Initializes the camera back to the initial factory setting (FACTORY SET FILE)
This initializes the camera back to the initial factory setting.
To change the settings, select "PRESET FILE LOAD" on MENU (3/4), then "FILE SELECT" and "LOAD START."
The following explains the set values, descriptions, and setting procedures.
Set Value
FILE SELECT ENGINEER (default)
FACTORY
LOAD START READY (default)
START
CANCEL
1
On MENU (3/4), turn the rotary pulse switch to
position the cursor on "PRESET FILE LOAD", and
press the SET button.
The submenu is displayed.
2
Turn the rotary pulse switch to position the cursor
on "FILE SELECT", and press the SET button.
The cursor moves to the mode selection column.
3
Turn the rotary pulse switch to select the value to
be set, and press the SET button.
The value is confirmed.
4
Press the SET button when the cursor
automatically moves to "LOAD START".
The cursor moves to the mode selection column and its
display changes from "READY" to "START".
Initializes the state back to the user setting.
Initializes the state back to the initial factory setting.
The state before initialization
Starts initialization.
Cancels initialization.
HC-HD300 1412 VER1 (U)
6.3 Initializing the Settings of this Product
Description
Position the cursor on
"PRESET FILE LOAD"
and confirm.
6
Position the cursor on
"FILE SELECT" and
confirm.
Select "ENGINEER"
or "FACTORY" and
confirm.
Position the cursor on
"LOAD START" and
confirm.
109