Table of Contents
Advertisement
5 Camera Setting and Adjustment
5.4 Using the USB memory
The USB memory can be used to store/read the setting
condition of the camera.
Caution
A USB which is locked with a password cannot be used.
Inserting and removing the USB
memory
on the rear side of the camera.
Caution
When inserting the USB memory in the slot, be sure that the
USB memory is facing in the correct direction.
Rear side
Saving the Setting Status of Camera
to the USB Memory
1
Use the MENU RE in the "MAIN MENU" to
move the cursor to "FILE OPERATION".
Then press the MENU RE to display the "FILE
OPERATION" sub menu
2
Select "USB MEMORY" and press the MENU
RE.
Display the sub menu of "USB MEMORY".
38
3
4
5
The USB mark is
displayed when the
USB memory is
inserted and
recognized by the
camera.
USB
6
UHL-43 2005 VER1 (E)
Select the item from the SAVE FILE submenu
that you wish to save.
S elect the items you wish to save, and then
press the MENU RE.
Use the MENU RE to set the file name with 8
characters.
Then, select the desired character and press the
MENU RE. When the MENU RE is pressed, it moves
to the next character.
When the file name is confirmed, the screen
returns to the "SAVE FILE" screen and "PUSH
SET → START" is displayed. Then, press the
MENU RE. If a file with the same name exists
in the USB memory, go to the Procedure 8. To
cancel the saving process, turn the MENU RE
when "PUSHSET → START" is displayed. Then
select "CANCEL" and press the MENU RE.
Advertisement
Table of Contents
