Using The Memory Card - Ikegami HDK-65C Operation Manual

5.3 Using the Memory Card

5.3 Using the Memory Card
The memory card can be used to store/read the setting condition of the camera.
For the memory card, it is possible to use the SD/SDHC memory card with the following specifications.
-Memory capacity : SD card from 32 MBytes to 2 GBytes.
SDHC card from 4 GBytes to 32 GBytes.
-Format : Format meeting standards of SD/SDHC memory card.
CAUTION:
Market-sold memory cards have undergone sufficient confirmation of operation at this company. However, we cannot assume any
responsibility for guaranteeing operation.
■ Inserting and removing the memory card
There is a memory card slot as shown in the illustration below on the bottom left side of the camera main unit.
Open the dustproof cover and insert the memory card in the memory card slot.
Dustproof cover
When removing the memory card from the card slot, gently press the memory card until there is a clicking sound and then carefully
remove the card.
98
＊＊＊ ＭＥＮＵ （1／３）＊＊＊
▲
ＶＦ ＤＩＳＰＬＡＹ
ＶＦ ＤＴＬ
ＭＩＣ ＧＡＩＮ ＣＯＮＴＲＯＬ
ＲＥＴＵＲＮ ＳＥＬＥＣＴ ＭＯＤＥ
ＦＩＬＴＥＲ ＳＥＲＶＯ ＭＯＤＥ
ＶＦ ＭＯＤＥ
ＳＷ ＦＵＮＣＴＩＯＮ
ＩＮＦＯＲＭＡＴＩＯＮ
HDK-65C 1501 VER1 (U)
Memory card slot
Access indicator
*The metal terminal is facing down.
Metal terminal
Memory card front Memory card back
CAUTION:
When inserting the memory card in the slot, be sure that the
memory card is facing in the correct direction.
If the camera is recognizing
the memory card normally,
the memory card mark is
displayed in the upper right
of the VF menu screen.