Using The Memory Card - Ikegami HDK-790GX Operation Manual

5.3 Using the Memory Card

5.3 Using the Memory Card
The memory card can be used to store/read the setting condition of the camera.
For the memory card, it is possible to use the SD/SDHC memory card with the following speci cations.
-Memory capacity : SD card from 32 MBytes to 2 GBytes.
SDHC card from 4 GBytes to 32 GBytes.
-Format : Format meeting standards of SD/SDHC memory card.
Caution:
Market-sold memory cards have undergone suf cient con rmation of operation at this company. However, we cannot assume any
- - -
responsibility for guaranteeing operation.
Inserting and removing the memory card
There is a memory card slot as shown in the illustration below on the bottom left side of the camera main unit.
Open the dustproof cover and insert the memory card in the memory card slot.
Camera Left View
Dustproof cover
When removing the memory card from the card slot, gently press the memory card until there is a clicking sound and then carefully
remove the card.
82
＊＊＊ ＭＥＮＵ （1／４）＊＊＊
▲
ＶＦ ＤＩＳＰＬＡＹ
ＶＦ ＤＴＬ
ＶＦ ＭＯＤＥ
ＦＯＣＵＳ ＡＳＳＩＳＴ
ＭＩＣ ＧＡＩＮ ＣＯＮＴＲＯＬ
ＲＥＴＵＲＮ ＳＥＬＥＣＴ ＭＯＤＥ
ＦＩＬＴＥＲ ＳＥＲＶＯ ＭＯＤＥ
ＳＷ ＦＵＮＣＴＩＯＮ
ＩＮＦＯＲＭＡＴＩＯＮ
HDK-790GX 1403 VER1 (U)
Access indicator
Memory card slot
*The metal terminal is facing down.
Metal terminal
Memory card front Memory card back
Caution:
When inserting the memory card in the slot, be sure that
the memory card is facing in the correct direction.
If the camera is recognizing
the memory card normally,
the memory card mark is
displayed in the upper right
of the VF menu screen.