Show Map Ip Port - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE
Command Mode
Interface Configuration (Ethernet Ports 1-8, Port Channel)
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• DSCP priority values are mapped to default Class of Service values
according to recommendations in the IEEE 802.1p standard, and then
subsequently mapped to the eight hardware priority queues.
• This command sets the IP DSCP priority for all interfaces.
Example
The following example shows how to map IP DSCP value 1 to CoS
value 0:
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#

show map ip port

This command shows the IP port priority map.
Syntax
show map ip port [interface]
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
4-264
I
NTERFACE
- unit - This is unit 1.
- port - Port number. (Range: 1-8)