Understanding Command Modes; Exec Commands; Table 4-1 Command Modes - SMC Networks TigerSwitch SMC8612T2 Management Manual

C L
OMMAND INE

Understanding Command Modes

The command set is divided into Exec and Configuration classes. Exec
commands generally display information on system status or clear
statistical counters. Configuration commands, on the other hand, modify
interface parameters or enable certain switching functions. These classes
are further divided into different modes. Available commands depend on
the selected mode. You can always enter a question mark "?" at the prompt
to display a list of the commands available for the current mode. The
command classes and associated modes are displayed in the following
table:
Class
Exec
Configuration
* You must be in Privileged Exec mode to access the Global configuration mode.
You must be in Global Configuration mode to access any of the other
configuration modes.

Exec Commands

When you open a new console session on the switch with the user name
and password "guest," the system enters the Normal Exec command
mode (or guest mode), displaying the "Console>" command prompt.
Only a limited number of the commands are available in this mode. You
can access all commands only from the Privileged Exec command mode
(or administrator mode). To access Privilege Exec mode, open a new
console session with the user name and password "admin." The system
will now display the "Console#" command prompt.
4-8
I
NTERFACE

Table 4-1 Command Modes

Mode
Normal
Privileged
Global
*
Access Control List
Interface
Line
Multiple Spanning Tree
VLAN Database