Table of Contents
Advertisement
MAC C
LONE
(R
M
O
)
OUTER
ODE
NLY
W
IRELESS
The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If
your ISP uses one of these protocols, then you must configure your
connection manually.
Choose menu "Network->MAC Clone", you can configure the MAC
address of the WAN on the screen below,
Figure 41: MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter.
Changes are rarely needed here.
WAN MAC Address - This field displays the current MAC address of
◆
the WAN port. If your ISP requires you to register the MAC address,
please enter the correct MAC address into this field in XX-XX-XX-XX-XX-
XX format (X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the
◆
PC that is managing the Router. If the MAC address is required, you can
click the Clone MAC Address To button and this MAC address will fill in
the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the
factory default value.
Click the Save button to save your settings.
Only the PC on your LAN can use the MAC Address Clone function.
N
:
OTE
There are five submenus under the Wireless menu (shown in
Wireless Settings, Wireless Security, Wireless MAC Filtering,
Wireless Advanced, and Wireless Statistics. Click any of them, and you
will be able to configure the corresponding function.
– 59 –
| Configuring the Router
C
4
HAPTER
Figure
41:
Figure
Wireless
42):
Advertisement
Table of Contents
