Mac Clone - SMC Networks Edge-corE NETWORKS BARRICADE SMCWGBR14-N2 User Manual

MAC C
LONE
The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If
your ISP uses one of these protocols, then you must configure your
connection manually.
Choose menu "Network->MAC Clone", you can configure the MAC address
of the WAN on the screen below:
Figure 25: MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter.
Changes are rarely needed here.
WAN MAC Address - This field displays the current MAC address of
◆
the WAN port. If your ISP requires you to register the MAC address,
please enter the correct MAC address into this field in XX-XX-XX-XX-XX-
XX format(X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the
◆
PC that is managing the Router. If the MAC address is required, you can
click the Clone MAC Address To button and this MAC address will fill in
the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the
factory default value.
Click the Save button to save your settings.
Only the PC on your LAN can use the MAC Address Clone function.
N :
OTE
– 40 –
| Network Settings
C 5
HAPTER

MAC Clone