Figure 36. Connecting fan cable to PIB connector
Next steps
1
Installing the internal PERC riser
2
Ensure all the cables are routed correctly.
3
Installing the air shroud
4
Follow the procedure listed in
Internal PERC riser
Removing the internal PERC riser
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Removing the air shroud
Steps
1
Open the cable guiding latch for easy access.
2
Lower the plunger.
3
Press the cable connector and disconnect the PERC cable from the backplane.
4
Hold the blue touch points and lift the internal PERC riser out of the system.
84
Installing and removing system components
After working inside your
system.
Safety
instructions.
Before working inside your
system.