Next steps
1
If removed,
install the butterfly
2
Follow the procedure listed in
Cooling fans
Removing the cooling fan
The procedure for removing standard and high performance fans are identical.
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Removing the air shroud
4
Removing the internal PERC riser
5
Move the cables out of the way to access the cooling fan cable connector on the system board.
Steps
1
Lift the fan out holding the blue touch point.
2
Disconnect the cooling fan cable connected to the system board connector.
NOTE:
In the 12 x 3.5-inch drive system, disconnect the fan 1 cable from the power interposer board connector.
80
Installing and removing system components
riser.
After working inside your
system.
Safety
instructions.
Before working inside your
system.