Figure 30. Inside the system with rear drive cage
1
Information tag
3
Cooling fans
5
CPU 1
7
System board
9
Internal PERC riser
11
Butterfly riser
13
Low profile riser right
15
Drive cage (rear)
Air shroud
Removing the air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
If installed,
remove the butterfly
76
Installing and removing system components
Safety
instructions.
Before working inside your
riser.
2
Drive backplane
4
Memory module
6
CPU 2
8
LOM riser card
10
Air shroud
12
Air shroud (12 x 3.5 inch + 2 x 3.5 inch rear hard drive
system)
14
Low profile riser left
system.