Table of Contents
Advertisement
iDRAC Quick Sync 2 indicator
code
Blinking amber
Right control panel view
Figure 7. Right control panel
Table 7. Right control panel
Item
Indicator, button, or connector
1
Power button
2
USB port
3
iDRAC Direct (Micro-AB USB)
4
iDRAC Direct (Micro-AB USB) LED
Condition
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Icon
N/A
Corrective action
Restart the system. If the problem persists, see the
Getting help
section.
Description
Indicates if the system is turned on or off. Press
the power button to manually turn on or off the
system.
NOTE:
Press the power button to
gracefully shut down an ACPI-
compliant operating system.
The USB ports are 4-pin, 2.0-compliant. These
ports enable you to connect USB devices to the
system.
The iDRAC Direct (Micro-AB USB) port enables
you to access the iDRAC Direct (Micro-AB)
features. For more information, see Integrated
Dell Remote Access Controller User's Guide at
Dell.com/poweredgemanuals.
The iDRAC Direct (Micro-AB USB) LED
indicator lights up to indicate that the iDRAC
Direct port is connected. For more information,
see the Integrated Dell Remote Access
Controller User's Guide at
poweredgemanuals.
Dell EMC PowerEdge R540 overview
Dell.com/
15
Advertisement
Table of Contents
