Table of Contents
Advertisement
Figure 121. Removing left control panel
3
Holding by the sides, remove the left control panel assembly away from the system.
Next step
Installing the left control panel
Installing the left control panel
Prerequisite
Follow the safety guidelines listed in
Steps
1
Route the control panel cable through the side wall of the system.
2
Align the left control panel assembly with the control panel slot on the system and place the assembly in the slot on the system.
3
Connect the control panel cable to the system board connector.
4
Using Phillips #1 screwdriver, tighten the screws to secure the left control panel assembly to the system.
Safety
instructions.
Installing and removing system components
167
Advertisement
Table of Contents
