Table of Contents
Advertisement
Table 9. Drive indicator codes
Drive status indicator code
Flashes green twice per second
Off
Flashes green, amber, and then turns off
Flashes amber four times per second
Flashes green slowly
Solid green
Flashes green for three seconds, amber for three seconds, and
then turns off after six seconds
Back panel features
The back view displays the features available on the back of the system.
Figure 9. Back panel features of 12 x 3.5-inch + 2 x 3.5-inch (rear) drive system
Table 10. Back panel features of R540
Item
1
2
Features
Serial port
Drive (2)
Condition
Identifying drive or preparing for removal.
Drive ready for removal.
NOTE:
The drive status indicator remains off until all drives are
initialized after the system is turned on. Drives are not ready
for removal during this time.
Predicted drive failure.
Drive failed.
Drive rebuilding.
Drive online.
Rebuild stopped.
Icon
N/A
Dell EMC PowerEdge R540 overview
Description
Use the serial port to connect a
serial device to the system. For
more information about the
supported serial port, see the
Technical specifications
section.
Two optional rear drives
supported for 12 x 3.5 inch
system.
17
Advertisement
Table of Contents
