Table of Contents
Advertisement
Next steps
Follow the procedure listed in
Removing expansion card from the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. If applicable,
remove the air
4. If applicable, disconnect the cables from the expansion card.
5. When removing a card from riser 2 or 3, ensure that the PCIe card holder latch is closed.
Steps
1. Pull the expansion card latch out of the slot.
2. Hold the expansion card by its edges, and pull the card until the card edge connector disengages from the expansion card connector
on the riser.
Figure 83. Removing the expansion card from expansion card riser 1
140
Installing and removing system components
After working inside your system
Safety instructions
Before working inside your system
shroud.
on page 72.
on page 71.
on page 72.
Advertisement
Table of Contents
