Figure 34. Removing cooling fan
Next steps
1
Installing cooling
fan.
2
Installing the internal PERC riser
3
Installing the air shroud
4
Follow the procedure listed in
Installing cooling fan
The procedure for installing standard and high performance fans are identical.
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Removing the air shroud
4
Removing the internal PERC riser
5
Remove the power cable.
6
Move the cables out of the way to access the cooling fan cable connector on the system board.
Steps
1
Holding the release tab blue touch point, place the cooling fan into the cooling fan cage.
2
Route the cooling fan cable and connect it to the connector on the system board.
82
Installing and removing system components
After working inside your
system.
Safety
instructions.
Before working inside your
system.