Table of Contents
Advertisement
Figure 93. Removing LOM riser card
Next step
Installing the LOM riser card
Installing the LOM riser card
Prerequisite
Follow the safety guidelines listed in
Steps
1
Align the connectors on the LOM riser card with the slot on the system.
2
Press the LOM riser card until the card is firmly seated on the system board connector and the two blue plastic snap hold the LOM
riser card in place.
3
Using a Phillips #2 screwdriver, replace the screws to secure the LOM riser card to the system board.
138
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
