Table of Contents
Advertisement
3
Installing the internal PERC riser
Installing the internal PERC riser
Prerequisite
Follow the safety guidelines listed in
Steps
1
Connect the cable to the internal PERC card.
Figure 39. Connecting the cable to internal PERC riser
2
Holding the blue touch points, align the slot on the internal PERC riser to the guide on the system board.
3
Insert the internal riser card's edge connector firmly into the system board connector until the riser is fully seated.
4
Lift the plunger to lock the riser in place.
86
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
