Table of Contents
Advertisement
Installing the front bezel
Prerequisite
Follow the safety guidelines listed in
Steps
1
Locate and remove the bezel key.
NOTE:
The bezel key is part of the LCD bezel package.
2
Align and insert the right end of the bezel onto the system.
3
Press the bezel until the button clicks in place and fit the left end of the bezel onto the system.
4
Lock the bezel by using the key.
Figure 24. Installing the front bezel with the LCD panel
System cover
NOTE:
The system cover of 12 x 3.5-inch + 2 x 3.5-inch (rear) system is different from other systems. The cover has one
additional mylar and foam layer on the front side of the system cover.
Removing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Turn off the system, including any attached peripherals.
3
Disconnect the system from the electrical outlet and disconnect the peripherals.
70
Installing and removing system components
Safety
instructions.
Safety
instructions.
Advertisement
Table of Contents
